Tag Archives: Evolis Zenius

Printer Warranty Update!

Find all of the current printer warranty information below.        

Posted in BadgePros | Tagged , , , , , , , , , , , , | Leave a comment

Can I send a Dual Sided Print Job to an Evolis Zenius?

The answer is YES Open the Evolis Print Center and double click on the Evolis Zenius Change the Card Insertion, Card Exit, and Reject Box to Manual Reception. Click apply and then Ok Send the dual sided print job to … Continue reading

Posted in Evolis, Zenius | Tagged , , , , , , , , | Leave a comment

Manual Feed Setting – Evolis Zenius

Take the following steps to change your Evolis Zenius to manual feeding: Open the Evolis Print Center Double click on the Evolis Zenius Printer Click on Printing and then Click on Feeder/Hopper Change the Card Insertion Setting to Manual Feeding … Continue reading

Posted in BadgePros, Evolis, How-To, Zenius | Tagged , , , , , , , , , | Leave a comment

How to carry out routine printer cleaning – Evolis Zenius

Posted in BadgePros, Cleaning and Maintenance, Evolis, How-To, Videos, Zenius | Tagged , , , , , , , , , | Leave a comment

Update Firmware – Evolis Zenius

Take the following steps to update your Zenius firmware: Download the latest firmware from Evolis’ website Make sure that there are no print jobs in the print que Open the Evolis Print Center Double Click on the Zenius Printer Click … Continue reading

Posted in BadgePros, Cleaning and Maintenance, Evolis, How-To, Zenius | Tagged , , , , , , , , | Leave a comment

Sleep Mode – Evolis Zenius

Take the following steps to change the Sleep Mode: Open the Evolis Print Center Double Click on the Zenius Printer Click on Administration Change the sleep timer to your preferred time. Click Apply. Click Ok.

Posted in BadgePros, Evolis, How-To, Zenius | Tagged , , , , , , | Leave a comment

How to Set the Print Head Kit # – Evolis Zenius

You must set the Print Head Kit # in the Zenius Driver and run a cleaning cycle after a print head is replaced: Open the Evolis Print Center Double Click on the Zenius Printer Click on Maintenance and then Print … Continue reading

Posted in BadgePros, Evolis, How-To, Zenius | Tagged , , , , , , | Leave a comment

Error 209 – Evolis Zenius

The ribbon installed in the machine is not recognized by the system: 1. This ribbon is not an Evolis High Trust® ribbon and does not have a recognition system Contact your dealer to exchange your current ribbon for an Evolis … Continue reading

Posted in BadgePros, Evolis, Won't Print, Zenius | Tagged , , , , , , , , | Leave a comment

Important Evolis Escape Commands

Evolis escape commands are used to: Adjust internal parameters Read internal parameters Develop application Syntax Each command start with a CAPITAL letter The separator characters is semicolon (;) The following are useful Evolis escape commands: Sa       Perform a self adjustment … Continue reading

Posted in BadgePros, Dualys, Evolis, ID Printers, Kiosk, Pebble, Primacy, Quantum, Securion, Tattoo, Zenius | Tagged , , , , , , , , , , , , , | Leave a comment

Omitting overlay – Evolis Zenius

Take the following steps if you wish to omit the overlay when printing a card: Evolis Zenius Open the Evolis Print Center and double click on the Evolis Zenius Click on the Printing Icon Click on Varnish adjusment Use the … Continue reading

Posted in BadgePros, Evolis, How-To, Zenius | Tagged , , , , , , | Leave a comment