Tag Archives: How to
Testing a Smart Card reader in an Evolis printer
Download the PSCS application by clicking here Double click on the application and it will launch. Click Run Choose your printer from the drop down menu Choose the reader that is installed in the printer Ensure that your printer is … Continue reading
How to Set the Print Head Kit # – Evolis Elypso
You must set the Print Head Kit # in the Elypso Driver and run a cleaning cycle after a print head is replaced: Open the Evolis Print Center Double Click on the Elypso Printer Click on Maintenance and then Print … Continue reading
Posted in Elypso, Evolis, How-To
Tagged Elypso, Evolis, How to, Info, Pkn, Set Print Head Kit #
Leave a comment
How to carry out advanced cleaning of the print head – Evolis Elypso
Posted in Elypso, Evolis, How-To
Tagged Clean print head, Elypso, Evolis, How to, Info, Videos
Leave a comment
How to carry out regular cleaning of the print head – Evolis Elypso
Please note that the print head is a delicate part of your printer. To avoid any damage to it: Disconnect the printer before cleaning the print head. Fully comply with the recommended cleaning cycles. Always avoid the print head to … Continue reading
How to carry out advanced card printer cleaning – Evolis Elypso
To carry out an in-depth clean of your printer, we recommend you clean the card feed rollers in addition to carrying out a basic clean every 5 regular cleans. Open the printer cover. Remove the ribbon from the printer if … Continue reading
Posted in Elypso, Evolis, How-To, Videos
Tagged advanced card printer cleaning, Elypso, Evolis, How to, Info
Leave a comment
Routine card printer cleaning – Evolis Elypso
The cleaning LED warns you when you need to clean the insides of the printer (every 1000 cards processed). Passing the adhesive card repeatedly through the printer cleans the cleaning roller. This removes any residual dust found on the front … Continue reading
Posted in Elypso, Evolis, How-To, Videos
Tagged Elypso, Evolis, How to, Info, regular cleaning
Leave a comment
Change Ribbon Type – CIAAT CTC-940
Take the following steps to change the ribbon type in the driver: Go to your printers and faxes folder, right click on the CIAAT CTC-940 printer and choose printing preferences. Select the ribbon type from the drop down menu and … Continue reading
Posted in BadgePros, Ciaat, CTC-940, How-To
Tagged change ribbon type, CIAAT, CIAAT- CTC940, How to, Info, select ribbon
Leave a comment
Cleaning Cycle – CIAAT CTC-940
Take the following steps to clean the CIAAT CTC-940 printer: Go to your printers and faxes folder, right click on the CIAAT CTC-940 printer and choose printing preferences. Click on the tools tab Click on the cleaning tool tab Follow … Continue reading
Posted in BadgePros, Cleaning and Maintenance, How-To
Tagged CIAAT CTC-940, Clean Printer, Cleaning, Cleaning Cycle, CTC-940, How to, Info
Leave a comment
