Monthly Archives: December 2011

Happy New Year from TransTech Systems and The Badge Pro!

Posted on December 30, 2011 by

Our office will be closed Monday January 2nd for the Holiday

Posted in BadgePros | Tagged , , | Leave a comment

Mag Encoding Fails – Datacard SP75

Posted on December 29, 2011 by

Take the following steps if your Datacard  SP75 is not mag encoding: Try different cards first Update your printer firmware and driver to the latest on Datacard’s website Make sure that the encoder is enabled in the driver Run a … Continue reading →

Posted in BadgePros, Datacard, Mag Encoding | Tagged , , , , , | Leave a comment

Error 231 – Evolis Zenius

Posted on December 29, 2011 by

Error 231 – Is a mechanical error, card jam error The print attempt has failed. One or more cards have become jammed in the printer, or there is a defect in a mechanical component. If a card is blocked, remove … Continue reading →

Posted in Card Jam, Evolis, Won't Print, Zenius | Tagged , , , , , , , , , | Leave a comment

Set Print Head Resistance Value – Fargo DTC550

Posted on December 28, 2011 by

You must set the print head resistance value after changing the print head You can find the resistance value on the print head Press the Menu Button Use the down arrow button to scroll down to Set  Up Printer and … Continue reading →

Posted in DTC550, HID Fargo, How-To | Tagged , , , , , , , , , , | Leave a comment

Ribbon Sensor Calibration Fails – Fargo DTC550

Posted on December 27, 2011 by

Take the following trouble shooting steps if your Fargo DTC550 Ribbon Sensor Calibration Fails: Update your printer driver and firmware and try the calibration again If the calibration fails from the printer driver try a sensor calibration directly from the … Continue reading →

Posted in BadgePros, DTC550, HID Fargo, Won't Print | Tagged , , , , , , , | Leave a comment

Won’t Communicate- Magicard Rio2E

Posted on December 23, 2011 by

If your Magicard Rio 2E won’t communicate, take the following steps: Ensure that your printer is turned on and plugged into your computer Check to make sure the USB port on the printer is not loose or broken Try a different … Continue reading →

Posted in Magicard, Won't Print | Tagged , , , , | Leave a comment

How to Replace the Print Head – Evolis Zenius

Posted on December 22, 2011 by

Note: You must set the Print Head Kit # in the driver and run a cleaning cycle after you replace the print head

Posted in BadgePros, Evolis, How-To, Videos, Zenius | Tagged , , , , , , | Leave a comment

Direct Ribbon Sensor Calibration – Fargo DTC550

Posted on December 21, 2011 by

Take the following steps calibrate your Fargo DTC550 ribbon sensor from the printer menu. Press the Menu Button Scroll down to Set Up Printer and press select Use the down arrow to scroll down to sensor calibration and press select … Continue reading →

Posted in BadgePros, DTC550, HID Fargo, How-To | Leave a comment

Printing CR79 Cards – Fargo DTC400E

Posted on December 21, 2011 by

If you are printing on CR79 cards with a Fargo DTC400E make sure that the driver and printer card selector switch is set correctly. Open the front cover and move the selector switch from CR80 to CR79 Go to your … Continue reading →

Posted in BadgePros, HID Fargo | Tagged , , , , , , , , , , | Leave a comment

How to Set the Print Head Kit # – Evolis Zenius

Posted on December 20, 2011 by

You must set the Print Head Kit # in the Zenius Driver and run a cleaning cycle after a print head is replaced: Open the Evolis Print Center Double Click on the Zenius Printer Click on Maintenance and then Print … Continue reading →

Posted in BadgePros, Evolis, How-To, Zenius | Tagged , , , , , , | Leave a comment