Advanced Print Head Cleaning – Evolis Primacy

Please note that the print head is a delicate part of your printer. To avoid any damage to it:

Disconnect the printer before cleaning the print head.
Fully comply with the recommended cleaning cycles.
Always avoid the print head to be in contact with sharp or metallic objects.
Do not directly touch the print head surface with your fingers.

Please note that violating any of these recommendations could cause permanent damages to the print head.
Use of the cleaning pen is recommended every 5 regular cleans. This can be used up to 8 times for cleaning the print head.

Unplug the power cable to power off the printer. The pushbutton switches off.
Open the printer cover.
Remove the cap from the cleaning pen.
Gently apply the pen to the print head, moving it from left to right for a few seconds.
Replace the cap on the pen.
Close the cover.
Wait a couple of minutes before using the printer until the cleaning product has fully evaporated.
Reconnect the power cable and power the printer on. The pushbutton turns on.

This entry was posted in BadgePros, Cleaning and Maintenance, Evolis, Primacy, Videos and tagged , , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

code