Tag Archives: Calibrate

Self Adjustment – Evolis Badgy 200

Posted on November 20, 2014 by

Use the Sa command to adjust all the sensors in the same process: Make sure a color ribbon and none card are inside the printer ln the Maintenance/Printer command prompting, send the Sa command: When the “warning LED” is flashing … Continue reading →

Posted in Badgy, How-To | Tagged , , , , , , | Leave a comment

Calibrate Sensors – GET Group CP500

Posted on February 10, 2014 by

You must enter Service Mode in order to run the calibration: To enter Service Mode, hold down the Menu button while rapidly pressing the up and down arrows, starting with up and alternating between them. When you start holding down … Continue reading →

Posted in GET Group, How-To, Toppan CP500 | Tagged , , , , , , | Leave a comment

Direct Ribbon Calibration – Fargo DTC4000

Posted on November 17, 2011 by

Take the following steps to calibrate the ribbon sensor from the printer Remove the ribbon and close the door Press the right button   Use the left button to scroll down to Toolbox and then press the right button Use … Continue reading →

Posted in DTC4000, HID Fargo, How-To | Tagged , , , , , | Leave a comment

Ribbon Calibration – Fargo C15

Posted on October 7, 2011 by

Take the following steps to calibrate your Fargo C15 ribbon sensor: Go to your printers and faxes folder Right click on the C15 printer and choose printing preferences Click on the advanced tab Scroll down and click on the calibrate … Continue reading →

Posted in HID Fargo, How-To, Won't Print | Tagged , , , , , | Leave a comment

Lamination Sensor Calibration – Fargo HDP5000

Posted on October 5, 2011 by

Take the following steps to calibrate the lamination sensor in a Fargo HDP5000: Go to your printers and faxes folder and right click on the HDP5000 printer. Choose printing preferences. Click on the Tool Box tab Click on the Calibrate … Continue reading →

Posted in HDP5000, HID Fargo, How-To | Tagged , , , , , , , , , | 2 Comments

Ribbon Calibration – Fargo DTC1000

Posted on September 30, 2011 by

Take the following steps to calibrate the Fargo DTC1000 ribbon sensor: Go to your printers and faxes folder, right click on the DTC1000 and choose Printing Preferences. Click on the Tool box tab Once the Tool Box opens, click on … Continue reading →

Posted in BadgePros, DTC1000, HID Fargo | Tagged , , , , , , | Leave a comment

Ribbon Calibration – Fargo DTC4000

Posted on September 21, 2011 by

Take the following steps to calibrate the Fargo DTC4000 ribbon sensor: Go to your printers and faxes folder, right click on the DTC4000 and choose Printing Preferences. Click on the Tool box tab Once the Tool Box opens, click on … Continue reading →

Posted in BadgePros, DTC4000, HID Fargo, How-To | Tagged , , , , , | Leave a comment

Film Sensor Calibration – Fargo HDP5000

Posted on August 11, 2011 by

Take the following steps to calibrate the Fargo HDP5000 film sensor: Go to your printers and faxes folder, right click on the HDP5000 and choose Printing Preferences. Click on the Tool box tab Once the Tool Box opens, click on … Continue reading →

Posted in BadgePros, HDP5000, HID Fargo, How-To | Tagged , , , , , | Leave a comment

Ribbon Sensor Calibration – Fargo HDP5000

Posted on July 26, 2011 by

Take these steps to calibrate the HDP5000 ribbon sensor: Go to your printers and faxes folder. Right click on the HDP5000 printer and choose printing preferences Click on the Tool Box tab Once the Tool Box opens read the instructions … Continue reading →

Posted in BadgePros, HDP5000, HID Fargo, How-To | Tagged , , , , , , , , , | 2 Comments

Ribbon Calibration – Fargo C30

Posted on June 17, 2011 by

If your ribbon is breaking or you are having ribbon errors please update your printer driver and firmware and calibrate the ribbon sensor. 1. Go to the printing preferences of the printer 2. Click on the Calibrate tab 3. Click … Continue reading →

Posted in Common Technical Issues, HID Fargo, How-To, ID Printers, Won't Print | Tagged , , , , , , | 1 Comment