Tag Archives: Evolis Primacy
Before starting the installation, plug the Primacy printer into your Mac and make sure you are logged with the Administrator rights. Run the driver installation Open System Preferences and click on Print and Fax Click on the + tab to … Continue reading
Introducing the New Evolis Primacy! The ultimate card printer!
You must set the Print Head Kit # in the Evolis Primacy Driver and run a cleaning cycle after a print head is replaced: Open the Evolis Print Center Double Click on the Primacy Printer Click on Maintenance and then Print … Continue reading
Take the following steps to change the Sleep Mode: Open the Evolis Print Center Double Click on the Evolis Primacy Printer Click on Administration Change the sleep timer to your preferred time. Click Apply. Click Ok.
Take the following steps to print an Evolis Primacy Technical Test Card: Open the Evolis Print Center and double click on the Evolis Primacy Click on System details Click on Testing Cards Click the Technical Test Card tab
Take the following steps to test the magnetic encoder on a Evolis Primacy: Open the Evolis Print Center Double Click on the Primacy Printer Click on Maintenance. Click on Magnetic encoding prompting Click the check box on each track. Enter … Continue reading
The answer is Yes. Cut the ribbon cleanly on both of the broken sides and tape it back together. Wind up the ribbon carefully so that it is correctly aligned.
Evolis escape commands are used to: Adjust internal parameters Read internal parameters Develop application Syntax Each command start with a CAPITAL letter The separator characters is semicolon (;) The following are useful Evolis escape commands: Sa Perform a self adjustment … Continue reading