Tag Archives: No print
Fargo C30 Ejects Blank Card
Check the following if your Fargo C30 is ejecting a blank card: Run a self test from the printer to eliminate the PC or software Update the firmware to the latest on Fargo’s website Ensure that you are using the … Continue reading
Fargo DTC400 Ejects Blank Card
Check the following if your DTC400 is ejecting a blank card: Run a self test from the printer to eliminate the PC or software Update the firmware to the latest on Fargo’s website Ensure that you are using the Magtech … Continue reading
Won’t Communicate – Fargo DTC1000
If your Fargo DTC1000 won’t communicate, take the following steps Ensure that your printer is turned on and plugged into your computer Check to make sure the USB port on the printer is not loose or broken Try a different … Continue reading
Evolis Pebble won’t communicate
If your Evolis Pebble won’t communicate, take the following steps: Ensure that your printer is turned on and plugged into your computer Make sure that there is not a print job stuck in the print queue Check to make sure … Continue reading
My Evolis Dualys’ Triangle Warning Light is blinking. What do I do?
If your Dualys’ triangle warning light is blinking, please check to ensure that your exit hopper is all the way down or up. It will click into position and the light will go off.