Tag Archives: Ribbon Error
“Ribbon Search Error” – IDP Smart 50
Check the ribbon balance using the left LED button on the front panel of the printer Check the installed state of the ribbon into the ribbon cartridge If the ribbon is broken, tape it back together and reinstall it Clean … Continue reading
“Ribbon not Found” error – IDP Smart 30
Steps to take to resolve: Press the left LED button to retry. If it occurs frequently, check the followings: Ensure that the ribbon is a genuine Smart 30 ribbon. Check to make sure that the ribbon is not completely used … Continue reading
“Ribbon Not Found” error – IDP Smart 50
Steps to take to resolve: Press the left LED button to retry. If it occurs frequently, check the followings: Ensure that the ribbon is a genuine Smart 50 ribbon. Check to make sure that the ribbon is not completely used … Continue reading
Error 211 – Evolis Zenius
211 – Ribbon wrong area Error The ribbon installed in the machine has been recognized by the system but is not compatible with the characteristics of your printer. 1.This is the first time the message has appeared Contact your dealer … Continue reading
New Evolis Ribbon Region Codes
With the launch of the new line of supplies for the Evolis Zenius and Evolis Primacy Evolis has updated their regional compatibility code system for consumables. Evolis has three primary region codes which correlate printers and the compatible consumables. Americas code … Continue reading
Wrong Ribbon Error – Fargo DTC550
Ensure that your ribbon is set correctly in the driver if your DTC550 is displaying a “Wrong Ribbon Installed” Error Go to your printers and faxes folder, right click on the Fargo DTC550, and choose printing preferences. Click on the … Continue reading
No ribbon installed – Fargo DTC550
Take the following steps if your Fargo DTC550 is displaying a “No ribbon installed” error: Turn the printer off for about 5 seconds and then turn it back on Try a different ribbon Make sure the ribbon is installed correctly … Continue reading
“No ribbon installed” error – Fargo HDP600
Here are a few things to try if your Fargo HDP600 has a “No ribbon installed” error 1. Restart the printer and run a self test 2. Verify that the ribbon is loaded correctly 3. Upgrade the printer firmware 4. … Continue reading
Ribbon Error light on an Evolis printer
If your Evolis printer’s ribbon light is on please check the following: Ensure the the ribbon is not broken Verify that the correct power supply is being used Ensure that you have not reached the end of the ribbon Ensure … Continue reading